How can I adjust the mold automatically when there is foreign matter in the mold? How about the location of the front and rear die blocks?. Be detailed and simple
Mode of clamping: fast --- slow --- low voltage --- high pressureInjection molding machine for different brands of different clamping structure is different, but also the same; for example (Taichung) adjusted low before high pressure and high pressure to adjust the position, such as the pressure - adjusting the thickness of die OK---- high voltage setting 70BAR high voltage position return to zero, the locking location data is then set - such as 20.5-- with 0.2 locations - set high - low voltage setting depends on the thickness of the product +1.0 cm - low pressure by 0 to start a +1 pressure low pressure test, the clamping motion not close up (low pressure, not recommended more than 8 special mould except) - in turn to see the lock mode low pressure die - if time is 0.8 seconds and 0.2 seconds on this basis, low pressure time is 1 second.Hope to be of help to you
1, low pressure clamping point, and even can go to zero,2, the speed is slow, as long as the mold in the fast mode locking inertia, continue to move on3, low voltage protection time is short.That is to say, the clamping force in the process of low voltage die clamping is smaller, the speed is slow, and the time of low voltage protection is short. Can play the role of low voltage protection, in the mold when there is foreign body, timely response, automatic mold opening.Set the position according to the actual situation of the mold.If my answer is helpful to you, please accept it. Thank you!
1, low pressure clamping point, and even can go to zero,2, the speed is slow, as long as the mold in the fast mode locking inertia, continue to move on3, low voltage protection time is short.That is to say, the clamping force in the process of low voltage die clamping is smaller, the speed is slow, and the time of low voltage protection is short. Can play the role of low voltage protection, in the mold when there is foreign body, timely response, automatic mold opening.Set the position according to the actual situation of the mold.
