From the set-top box next to the cat out of the network can be directly connected to the Internet, but the middle connection wireless router can not access the Internet, in the end what happened?.
The problem can be solved, and the rest is not difficult.Contrast the normal cable network card status, look at the status of the wireless network card, is not to get the IP, DNS, gateway and other projects, manual settings, compared to copy it.In addition, slowly familiar with some of the concepts of wireless router settings, try learning to use WLAN port connection. Set the main tip: automatic acquisition of IP===LAN IP WAN: (login using IP): manual and cat over IP different segments of the ===LAN DHCP = open when necessary, manual fill local DNS=== computer cable card, wireless card: automatic.Because change this setting, the relationship is slightly more complex, less skilled will have more trouble, so to give you a way to catch up by the way of knowledge. Ha ha, I wish you a happy study.
Wireless routers are not installed on the set-top boxes of cable TV, and if you want to install a wireless router to send WiFi signals, you need to connect your home broadband cat or light cat. General connections and installation methods are as follows:1. Insert an external broadband / fiber network into the cat's WAN port, then insert the network cable from the cat's LAN port and plug it into the WAN port of the wireless router, providing the router with a network signal.2, and then use the network cable to connect the router's LAN port and computer network interface.3, open the computer browser, access the router settings page, enter the management account number and password (usually admin, to the instruction manual) login.4, log into the router settings interface, select quick settings, follow the prompts to enter the broadband optical fiber network, account / password; WiFi signal name and then set a good launch and password, save the settings, restart the router.5, the next user can open the mobile phone or other terminal equipment of the WiFi search function, WiFi signal nearby, find the router sends the WiFi signal, click on the link, enter the corresponding WiFi code, can be successfully connected, the internet.
Cat out of the cable network can be connected directly, it is not a problem.The key is, what kind of ports do you connect to? LAN mouth? WAN mouth?Relatively simple settings.The computer manually sets IP (192.168.1.xxx), connects the LAN port of the wireless router, login the router management interface, and then switches off the LAN DHCP function.Then, the set-top box out of the network cable to connect the wireless router's LAN port. [unable to connect to WAN port].Set the computer back to automatic IP, just fine.
