Home > categories > Electrical Equipment & Supplies > Transformers > How do I ground the 273-1366A transformer to the system where its connects. I heard systems must share ground.?
Question:

How do I ground the 273-1366A transformer to the system where its connects. I heard systems must share ground.?

I need this Radio Shack transformer to provide power to a HO scale model train board lighting system. This transformer will be connected to a brightness control system and then the brightness control system will be connected to building lights and street lights. I have been told this issue is a safety and Electrical Code concern?

Answer:

a acceptable web site. Face the construction south with residing house windows in basic terms in the south elevation. the north elevation could the two have a small variety of small residing house windows or be breamed with earth. For an present residing house, Geothermal is huge in case you have the money. the traditional forced warm air gadget that maximum US properties has is likely considered one of the main effective for the preliminary value and maintenance in comparison to the warmth is generates. A German business enterprise, called viessman (sp) creates very useful structures for this configuataion.
Tying the neutral to ground gives the system a reference point. Your system will then be protected against earth faults which would allow circuit fuses to blow to protect each sub-circuit should an earth fault develop. Without the neutral earth connection an earth fault on a given sub circuit would not result in a fuse blowing / breaker tripping thereby potentially causing associated metalwork to reach dangerously high potential and possible danger of electric shock should a person happen to touch the live metalwork and live parts at the same time.

Share to: