How do you cut the plastic soft glass?
Cut out: the specifications of the glass film are cut more than 1cm. This will avoid sticking to the wrong side (one side, one side, less), causing repeated sticking problems.
. paste: first glass film on the glass after the average proportion, posted on the glass top and aligned paste from the top down. If not a one-time good, can be reopened repeatedly paste (water spray benefits).5. air bubble: a scraper or IP card from the center to the around water and scraping bubble, catch out water and air bubbles with a needle or blade punctured by a smooth. Until there is no moisture and bubbles, the glass film is completely glued to the glass.The 6. part: cut the remaining paste after the film and then cut off the excess blade well.
Take off the back of the film: take off the film after the film on the back of the film (with plastic surface) also spray enough water, so that the paste process can be randomly moved back and forth on the glass, to facilitate the right place.
Cleaning glass: before sticking the glass paper, clean the oil, dirt and dust on the glass, then spray enough water (add one or two drops of detergent) to the glass, and then go down. The purpose of water spraying is to temporarily reduce the viscosity of the glass film, etc., after drying, it will not affect the viscosity.
