How do you start with a screwdriver on your computer's motherboard?
Correct, not with a screwdriver point down where, it is the use of screwdriver conductive, and other conductive things are the same. Point on the main board jumper, connect the two keys of the chassis boot key, generally on the motherboard are marked power, as long as the conductive things, the two needles are connected, the computer will start.
That test the performance of the switch, the machine can not in the case to determine whether is good or bad switch, switch socket can be connected to the power supply transient short circuit start switch using a screwdriver or board feet, if you can start it is a bad switch. This method can quickly determine the switch is good or bad, but if the operation is wrong, such as short circuit fault pin will likely cause damage to the motherboard!
Some board English small print is not written in pin place, other position for the motherboard, corresponding to the label can be shorted.
Find the boot pin with a screwdriver, the two pin connected together can boot.
First, look for the motherboard manual connection method, above a switch, usually in the lower right corner of the board position, says PWR SW, the 2 sign is if not, have the small print on the motherboard, you control a line of words should be corresponding.
