My original TV is broken, change a new, because the TV and set-top box was set out, is to use a remote control, this time to set up, but how to get the help you forget the trouble
The set-top box and TV two remote control functions need to be made one, the main function of "TV remote learning" to the set-top box remote controller, the specific operation is as follows: the first step: the set-top box remote stationary on the desktop, press and hold the "Settings" button (some of the "learning" button shown below, the "1" position) for more than 3 seconds, until the red indicator on the remote control panel (shown in the "2" position) often bright, release your hand. At this point, the set-top box remote control is already in the waiting state of learning.The second step: press a function key that you need to "learn", such as "channel +" key (position of "3" shown below), and release.The third step: the TV remote controller is also flat on the table, the front end of the infrared transmitter infrared transmitter and set-top box remote alignment into a straight line, two remote distance within 3--10cm, as shown below:Press the "program +" button of the TV remote control quickly, the red indicator light on the set-top box remote control panel flashes several times, and then resume normally, indicating that the function of "channel +" has been "learning" successfully. Then, according to the above method, the functions of other keys on the TV remote controller are studied one by one to the set-top box remote controller.
Big phone calls for people with set-top boxes. Let them get it for you!
Learning remote Coship set-top box using the method:1. press and hold the settings button for 2 seconds, and the LED light is dimmed to enter the learning state.2. Press the button to learn (such as: volume, power switch, etc.), the indicator light is shining, in the learning state.3., two remote control transmitter head in a straight line, distance 10mm, and then press the TV remote control button to learn, and keep about 1 second release. LED lights flash three times, continue to long bright, learning success, that has received the signal, the button function has been learning.4. continue to follow the second steps to learn the rest of the button.5. press the set key to end
1. Press the "help" button on the set-top box remote to the set-top box,2, according to the "3, we select the TV screen in the" remote control guide "option,3, according to the "confirmation" button to enter, browse by "long, print" button.The set-top box remote controller belongs to the learning remote control, remote control on the television every key control area and study area can learn (copy) of any remote control your TV on a key function.Specific learning methods can refer to the instructions on the back of the remote controller or the built-in remote control guide used in the set-top box":1 press and hold the settings button (about 3 seconds) until the blue light on the remote controller is bright.2, press the button to learn (such as power), the blue light began flashing, at this time the remote control is in the learning receive state.3, the TV remote control and set-top box remote control (top relative emission tube relative), hold down the TV remote control to learn the key for a few seconds, the set-top box remote blue indicator light flashes quickly into a few long bright state, which represents the key learning success.4, if you need to learn other keys, repeat the 2 and 3 steps.5, press the "set" button or 30 seconds without operation, the blue light goes out, indicating that the operation is saved and exited the learning state.
