Home > categories > Construction & Real Estate > Basin Faucets > How is the detachment of the Crowe basin?
Question:

How is the detachment of the Crowe basin?

How is the detachment of the Crowe basin?

Answer:

Still can not be demolished, you can brush some kerosene on the screw, so that kerosene soaked into the screw (about 2-4 hours) after the demolition; can not be removed to the faucet, the faucet can be cut off
In the case of disassembly, you can open the door at the door of the lock, unlock the wire wrapped around the bracket, you can wash basin together with the basin with the water from the bracket to move down, The washbasin is disassembled on the ground.
First of all, in order to prevent the faucet from rotating, damage the basin, need to use the wrench from the upper hand wrench the difficulty of the need for a special bend wrench under the basin to remove the faucet lock mother and root mother.
Finally, when the faucet, where the faucet and the basin contact with the place, are required to use rubber lap pad (the top of a basin, the following one), with the wrench to the root of the root and lock the mother tightened, the root of the fixed water faucet Role, if installed too loose, the tap in the use of rotation, so that the following lock the mother to produce leakage problems.
Lock the mother and the tube connected to the need to use rubber band or details, need to use rubber band or fine asbestos rope to fill the filler.

Share to: