How to build a artificial lawn for home?
Artificial lawn for home based on surface roughness of high degree, in order to ensure the consistency of the artificial grass surface layer thickness of the, homogeneous elastic. Flatness qualification rate in more than 95%, 5 m ruler error 3mm, slope: transverse 8 per thousand, length of 5 per thousand, semi-circular area 5 per thousand, the surface should be flat, smooth, to ensure the water exhaust. Based on with a certain strength and stability.
Above the base layer is a layer of buffer layer, usually composed of rubber or plastics, rubber elasticity is moderate, thickness.... foam with low cost, but poor elasticity, thickness 5 ~ 10mm thick lawn is too soft, and easy to sag; thin lack flexibility to buffer. The buffer layer to securely paste on the base layer, usually with white latex or all-purpose adhesive paste.
Artificial turf by three layers of materials. The base layer is formed of compacted soil, gravel layer and the asphalt or concrete layer. Base layer required a solid, no deformation, surface smooth and impervious, namely the general concrete ground. Due to the home site is small, construction must basic layer, prevent sinking. If the concrete covering layer. After the concrete is cured to cutting out of the expansion joints, to prevent thermal expansion deformation and crack.
To fake grass leaflike synthetic fiber implanted in a woven fabric, coat the back fixing coating to writers in the artificial turf for home.Will leaf grass imitation of synthetic fiber implanted in a woven fabric, on fixing coating is coated on the back of chemical products with natural grass sports performance. Widely used in sports and leisure place.
Artificial lawn for home on the surface of a solid, no cracks, no broken edge pits, smooth straight seams, with about 6000 mm * 6000mm cuts for good cushion compaction, compacting degree was more than 95%. In medium rolling machine after the pressure, no significant wheel track, no loose topsoil, wave phenomenon. The cement foundation required water resisting strata, aquiclude with new PVC thick impermeable film, junction should be greater than 300mm, edge margin of more than 150mm.
