How to deal with nylon raincoat
The hole, you can use the same plastic cloth cut into the hole a little larger than a square or round, cover the hole above, then covered with glass paper, you can fill in the same heating method. Rubber raincoat odor to divide the rubber raincoat has peculiar smell, can be mixed with hydrogen peroxide into the water to soak the raincoat, dry smell will disappear.
After a certain period of time, the plastic raincoat will be hard, because the plasticizer has evaporated in a long time. There is no possibility of recovery. Military raincoat is made of cloth and rubber, compared to maintain the original state.
The best use of the raincoat dry cloth wipe in a cool place to dry naturally, not under the scorching sun. You can not rub cleaning raincoat, make PVC and nylon cloth from lead to air infiltration and foaming. The storage method of rubber raincoat rubber raincoat, the newspaper lining in the mezzanine, or sprinkle a layer of powder and then fold, such a long storage time is not binding. Slight wrinkles appear plastic raincoat wrinkle method raincoat, which can be hung on a hanger, let it naturally healing. If the wrinkles are tight, the raincoat can be soaked in 70 degrees Celsius in the hot water for about 2 minutes, after taking out on the flat plate, and then dry the water mark, you can restore the formation, do not pay attention to pull. Plastic raincoat sticking method of plastic raincoat rupture, can be the first break aligned, covered with a piece of paper and glass, hot iron on it several times, each time not under pressure is too long, so that the glass paper not burned, and then glued the plastic below.
