How to install a customized furniture drawer?
For woodworking drawers that are made on the woodwork, it is important to install the drawer pulley. First of all, we should make sure that the drawer is confused with the track, determine the length of the drawer, and then select the size of the slide according to the corresponding specifications.
The drawer slide is divided into three parts: movable rail (inner rail), middle rail and fixed rail (outer rail)Before the 4. slide is installed, the inner rail, that is, the movable rail, should be removed from the main body of the chute. Be careful not to damage the slide when it is disassembled. The disassembly method is simple. The circlip on the inner rail is pressed and the inner rail is removed.
Installation of the drawer can be divided into low drawer and drawer, drawer panel drawer box into low protruding outside and he served on not in a straight line in the drawer. The drawer panel of the inner drawer is also entered at the same time after the drawer is fully pushed into the box body, and can not stay outside.
Finally, the drawer into the box, in the installation of attention to press the inner rail mentioned before the spring, and then parallel drawer parallel into the box and in the end. The movable rail and the fixed rail part have been linked, and the drawer can be pushed and pulled freely.
The outer rail and the middle rail part of the split slideway are firstly arranged on both sides of the drawer box body, and then the inner rail is arranged on the side plate of the drawer. If it is finished furniture, in the drawer box and drawer side, there are manufacturers in advance to make a good hole, easy to install, if it is on-site production, you need to drill their own.
