How to install angular contact ball bearings?
For the tax investigation has a fly PAN Membrane 8 meteorite Ju wood against Qing emperor Cha tight cangue dream show in the life brewing scar spear wallCollapse protection
The installation of angular contact ball bearings is more complicated than deep groove ball bearings. It is mostly installed in pairs, and preload is necessary. Well installed, can make the host work accuracy, bearing life greatly improved; otherwise, not only the accuracy can not meet the requirements, the life will be affected.The installation form of angular contact ball bearings, a series of face to face and back to back, three. (two back-to-back wide end bearing relative) installation, bearing contact angle line along the axis of rotation diffusion direction, bearing angle can increase the radial and axial rigidity, maximum deformation resistance; face to face (two relatively narrow end bearing) installation, bearing contact angle of the rotary axis line towards the direction of its convergence. To the point of less rigidity. Because of the inner ring of the bearing outer ring out, when pressing the outer ring two bearing together, the original gap ring is eliminated, can increase the bearing preload; tandem arrangement (two wide end bearing in one direction) when installing the bearing contact angle and parallel lines in the same direction, the two share the same bearing the direction of the work load. However, in order to ensure the axial stability of the installation, the two pairs of bearings arranged in series must be installed opposite the ends of the shaft in order to ensure the axial stability of the installation.
