What are the differences between angular contact bearings and deep groove ball bearings?
The difference between deep groove bearings with the angular contact bearings in the structure is: deep groove bearings and rolling contact rail check section view on the parallel with the axis, the angular contact bearing rail has an open angle in one direction, and the axis or axis of the vertical line and an alpha angle. As shown. No. 6 bearings mainly bear radial force, bearing No. 7 can bear radial force and axial force.
You take a look at two, you know, the angle of contact with a few angles to look at, you know the difference
Deep groove ball bearings and angular contact ball bearings with inner and outer diameters and wide dimensions have the same inner ring size and structure, but have different outer ring sizes and structures:1. deep groove ball bearings, outer raceway, both sides of the double shoulder, and angular contact ball bearings generally single shoulder;2. deep groove ball bearings, raceway curvature and angular contact ball is different, the latter is often greater than the former;3. deep groove ball bearings, outer raceway and angular contact ball bearings of different, non central position, the specific value of angular contact ball bearings designed to be considered, and the degree of contact angle related;In terms of use:1. two different purposes, suitable for deep groove ball bearings bear radial force and smaller axial force, axial and radial load and combined load torque, and angular contact ball bearings can withstand axial load, radial load is larger (with different contact angles and loads of different sizes), double matching (with matching mode vary) is two-way can withstand axial load and torque load.2., the limit speed is different, the same size of angular contact ball bearings, the ultimate speed is higher than deep groove ball bearings.With type, size, precision, and so on.
