How to install artificial marble windowsill plate
1, artificial stone for bay windows and windowsill countertops, we must first check whether the foundation is smooth, such as the basis of uneven should not lay artificial marble, it is best to use the decoration with the big core board leveling and laying artificial stone.
2, artificial stone countertops laid on the windowsill countertops, such as the foundation is the big core board, with glass glue can be bonded, such as the foundation is the cement surface, with marble glue (marble glue) can be bonded.
3, artificial stone laying in the windowsill countertops, the lower edge must be added double-layer, to enhance the strength of the table to prevent the fracture.
1. Grassroots cleanup
The base should have sufficient rigidity and stability. Base surface should be clean and smooth, smooth surface of the grass to be chiseled to facilitate the base layer and decorative panels of the bonding, the concrete protruding parts of the surface to be flattened, and then watering wet.
2. wipe the bottom ash
Wipe the thickness of 12mm 1: 3 cement mortar, looking for rules, with a short woodworking scratched, and cut hair.
3. Locate the elastic line
According to the design drawings and the actual paste of the site, as well as the windows used to decorate the panel specifications, the size of the pop-up horizontal and vertical lines. To ensure that the slit seam is tight, no water seepage, the need to consider the panel when the width of the joints, generally not more than 1mm.
4. Paste the trim panel
First in the wipe the bottom of the ash sprinkler wetting, and will be pasted on the surface of a thin scraping a slurry of water, and then will be selected after a good moist, dry sandstone sill on the back of the cast plate 2-3mm thick Of the water slurry, paste, paste with a wooden hammer gently tap, so that fixed, paste should always use the ruler to find straight, and the use of stent stability by the foot, then the outflow of mortar wipe, so as not to Contaminated adjacent to the finishes. For smaller parts of the area, can also be used epoxy adhesive and other adhesive directly inlay. After the marble sill plate is bonded, carry out the necessary cleaning and maintenance.
Artificial marble windowsill board installation is divided into grass-roots clean-up, wiping ash, positioning the ball and paste the four main decorative process
