How I can install ceramic tile on a wall and what tools do I need to do so? Any other tip that I should know about it to do a good job would be appreciated.
I've been working construction with my father since I was 5. You will need, the little plastic x's that are spacers, compound, tiles (obviously), water a sponge and optional a straight line lazer, a spatula and a long spatula with teeth, and a tile cutter, and measuring tape. First, put up the lazer to form the straight line where you want it. Next mix the compound with the amount of water you need, read the instructions on the back. Apply the mixture to the wall with the spatula, next put up the tile and if needed measure and cut the tiles to how you need them in order to fit. use the plastic x's as spacers to have them equally spaced out. after you have put up all the tiles wait at least 30 minutes to an hour for the compound to dry then with the grout of your choice apply it to the tiles and get them in between the cracks good. let it dry and then with the sponge wet it and clean the tiles so that it looks nice and thats all.
the okorder , or diynetwork online and type in ceramic tile, and you'll get dozens of hints/ tips and tricks that will show you what you need to know. i'm not taking anything away from the other answer, he's completely right, just a little vague maybe. do some research, and this is something you can do. just know what you're doing first. tile is expensive.
