There are two screens in the computer screen. One side says "A", and the other is "B". Do you need to paste A first and then paste B? Do you have two at a time? Thank you
2. the adsorption layer at the screen corner, make sure the position of alignment, while tearing, back from the film layer on the side of caution to heal, because now the protective film has automatic electrostatic adsorption function, do not need too much wait. The film moves slowly, along the long edge of the screen that a surface, from point to line, from line to surface in order to start.
You can see the following steps.1. will be marked with a membrane facing the quasi screen, and will be removed from the layer of film labels pulled, and slowly tear the part of the layer, please pay attention to fingers do not touch the protective film adsorption layer (middle layer)
3., after the good, and then start from the label, tear off the layer (in front of your layer) release film.
