Home > categories > Construction & Real Estate > Tile > How to remove the shoe oil into the tiles
Question:

How to remove the shoe oil into the tiles

How to remove the shoe oil into the tiles

Answer:

Use mineral oil, alcohol or acetone wipe. With a clean cream, Yi Jie clean cream, to ensure that can be removed,
You can wipe with orange peel or grapefruit skin Alkali washing: sodium hydroxide (caustic soda) with a temperature of 80 degrees or more hot water dubbed 5-10% solution, and then waste toothbrush solution scrub, you can remove. Pickling: directly with waste toothbrush stained with hydrochloric acid scrub, you can remove. With the caustic soda is the most common, warm water plus caustic soda, brush with a brush, but pay attention to do not touch the skin, will burn, difficult to remove the place, with a waste cloth wiping alkaline water cover for a while, do not hand or wear rubber gloves operating, You can sprinkle a little flour, let it absorb oil and then wipe. You can cover the toilet paper or paper towel on the tile, and then spray the detergent and then put a while, the detergent will not drop everywhere, and the grease will all float up. As long as the toilet paper tore, and then a clean cloth dipped in water, more than once or twice wipe it. Sprinkle the point of detergent, soaked in water for ten minutes, then wipe the ball ball that is good. Toothpaste has a strong cleaning effect, ready to use toothpaste every day, and then, to find a used toothbrush. Put the toothpaste on the toothbrush, and then brush a brush along the tiles, and then wipe a damp cloth on it.
Also provided by Grammy Music Ceramics Tiles in the course of the use may be due to improper use of surface contamination caused by the phenomenon of common seepage of several treatment methods are as follows: 1, tea stains, fruit stains, coffee, jelly vinegar, shoes and other stains using sodium hypochlorite dilution (bleach), soak for 20-30 minutes after use with a cloth wipe; some infiltration of brick longer stains, soaking Time takes a few hours. 2, ink, anti-fouling wax moldy moldy, the use of sodium hypochlorite dilution (bleach). Use as long as the bleach applied to the stains soak for a few minutes to clean. 3, cement, scale, rust, rust using hydrochloric acid or phosphoric acid solution, can be wiped several times. 4, paint, oil, oil mark, the surface of anti-fouling wax layer using alkaline cleaning agent or organic solvents (and 5 ketone, triethylene), to paint to oil. 5, gum hammer decontamination Use: first use 20% -40% sodium hydroxide solution soak for 24 hours after the wipe with a cloth, and then 30% -50% hydrochloric acid solution soak for 30 minutes Cloth wipe clean. 6, ice cream use alkaline cleaning agent. 7, lime scale use of acid cleaner. Note: 1, more than the use of defibrillators need to wear plastic gloves. 2, the stains will be removed after the water to wash the brick surface. 3, the market or supermarkets have the latest decontamination detergent, can refer to the scope of the above decontamination and methods.

Share to: