How to use a wire clamp and a line to make a crystal head?
Put the line there is a gap in the local cable clamp circle, the shell open, according to the order line, white orange, orange, white, green, blue, white, blue, green, white, brown, brown. Put the line in this order and hold the crystal head straight up (the side without the buckle is front) and force the thread into it! Try to put the cable plug, but clamp, beat down, how much force no problem, the pressure is not bad!
Pressure line: insert the crystal head into the slot, and press the clamp tightly!
Discharge: the crystal head has one end of the plastic spring sheet down, with one end of the metal pin upwards, the neat 8 strands inserted into the crystal head and tightly pressed to the top.
The method of using a wire clamp and a line to make a crystal head is as follows:1.: the cable stripping head peeling, peeling three centimeters;2. line: the line winding with 8 shares of 4 groups separately and straight lines;3. line: according to the white orange, orange and white green, blue, white and blue, green, white, brown rice dumplings in order4., cut together: put the line together, and then use the line clamp with a knife edge, cut the end of the net line;
