How to use carpet cleaner?
Carpet cleanerThe main ingredients are hollow globular silica, dried cellulose pulp and added a small amount of surfactant. When the utility model is used, the dry cleaning agent is applied to the carpet, and the dust is sucked away by the vacuum cleaner, and the pollutant is effectively removed, and the cleaning effect is more than 90%, and the product is less polluted to the carpet. Vacuum suction recovery rate of 94%~96%.
Aerosol carpet cleanerThe main ingredients are surfactants, solvents, additives, polymers, flavors and so on. Usually made of liquid detergent, then into aerosol cans made of aerosol packaging products. Spray foam on the carpet while using and remove the residue with a brush after drying.
Powdered carpet shampooThe main components are formaldehyde urea resin, foam granule carrier, bactericide, solvent, antistatic agent and surfactant. When used, the dirt is absorbed by the carrier and sucked by a vacuum cleaner. This product has the function of cleaning, antistatic and bactericidal. After cleaning, the carpet is soft and clean, and the original condition has been restored.
Universal carpet shampooThe aluminum magnesium silicate, xanthan gum, sodium lauryl sulfate, sodium lauroyl sarcosinate, styrene maleic anhydride copolymer as raw material is dissolved in water, ammonia to adjust the pH value of 7~9, then add flavor and color. The product is transparent liquid. It has no damage to the fiber, good wetting and permeability. It is easy to evaporate and dry. Apply to wool and synthetic fiber carpet can be.When in use, add the product 15g in each liter of water, dissolve it on the carpet, then scrub with a brush, then dry with a dry cloth, or use a vacuum cleaner to remove dirt and moisture. After 3~4h, the carpet can be used.
