How to use the leveling machine to dig the side ditch? Side ditch, please help your friend
The first time when the blade angle adjustment will deepen to 11o, and then gradually increased to 16O, 21o, 26o, every increase 5O, plane angle 35o45o is unchanged, after each shovel put away the earth for the next time to deepen work, soil ridge formed by earth should be to avoid the rear wheels. Impact of the next operation. The last shovel work should reach the full depth and full width of the ditch. When the trench is dug to full depth, the outer slope should be trimmed. If the topographic conditions permit, can make the grader across the trench, the soil after cutting to ditch the outer edge of the shovel or with the shovel shovel of soil will be tangential to the rear ditch, then clear. If the limit of the terrain, can be tilted to the guide blade side side of the fuselage, the adjustment method of top.
The front incline groove inside, shovel shovel end in the trench from the trench edge is about 1530cm, the grader at low speed, slow down the shovel and began to shovel dirt. When the shovel shovel down depth of not more than 10cm, to mark the line for the purpose. After the operation line is marked, the operations will be deepened gradually according to the predetermined depth of the ditch.
A road grader digging ditches or field drains, usually implemented according to the following steps: 1. Adjust the blade plane angle is 35o, the shovel angle is 40o, the tilt angle is about 9o. The adjustment method, as mentioned above.
