Home > categories > Security & Protection > Fire Extinguisher > How would a anti laser armor work?
Question:

How would a anti laser armor work?

How would a anti laser armor that can defend itself against a extremely powerful laser that is 5 meters in diameter and can easily burn through any material?

Answer:

If you're referring to gas as in fuel for automobiles then Class B definitely, but you can use a Class A pressure water extinguisher if it contains AFFF (Aqueous Film Forming Foam). The foam provides a protective barrier over the fuel and prevents it from vaporizing and reigniting. If you're referring to a flammable gas as in LPG or natural gas, etc., then none of the extinguishers are adequate enough to put out gas under pressure. The best way is to turn it off at the source or plug the leak.
It isn't a gas but it uses a gas to be forced out of the tank. It isn't a solid because foam is not a solid, that only leaves liquid.
I've always carried on in my vehicles and they always been the dry chemical fire extinguishers
the 1st element you may attempt is to swap the door lock relay(s). Then, if that would not artwork, you may choose new door lock swap(es). in many situations while the relay clicks, meaning the relay is undesirable. you may get the relays and door lock swap at maximum automobile areas shops.

Share to: