HX-100B fire sound and light alarm how to code
One is with the address code if it is built-in CPU to use a dedicated encoder code, if it is external, then the direct dial code, generally decimal, 1 = 1,2 = 2,3 = 4, 4 = 8,5 = 16,6 = 32,7 = 64, you can dial any number from 1 to 127. There is no address code, controlled by the control module, it will match the power supply can work.
This code is coded with the GST-BMQ-2 encoder of the bay, and the encoder clips on the encoder are clamped to the Z1 and Z2 terminals of the acousto-optic alarm. Open the encoder, H002 or H003, then press to clear Need to compile the address code, such as "20",
Press the "code" button, if the code is not successful screen will display E; code successfully screen will be a separate display "P" or the next address. After encoding the code you also through the encoder above the "reading code" button to read, if the code should be read out just the code
