Hydraulic jointWho knows whether the hydraulic joint 3/8*25.4=9.525 refers to the inside or outside diameter of the joint?. How exactly should I call it?
3/8 is an English name. We call it "10 connectors", referring to the outer diameter of this joint.
The ends of the pipe shall be flush. The pipe should be flush in sawing grinding wheel and other tools, and burr cleaning and blowing with high pressure air before use. When installing, the coaxiality of pipe and joint body should be kept as far as possible. If the pipe deflection is too large, it will cause sealing failure. If the pre loading force is unfavorable, the inner edge of the ambassador card sleeve is just inserted into the outer wall of the pipe, and the clamping sleeve should not be deformed obviously. When the pipeline connection, and then according to the specified tightening force assembly. Phi 6-1 card sleeve tightening force is 64-1 15N, 16 MMR 259n, Phi Phi 18mm for 450n. If the sleeve is badly deformed at pre assembly, it will lose its sealing effect
The most important part of the pre assembly of sleeve type pipe joints directly affects the reliability of the seal. A dedicated preprocessor is usually required. The small diameter can be pre joint in a vise. The concrete method is to use a joint as the mother's body and press the nut and the sleeve onto the tube. The utility model mainly comprises a sleeve type through pipe joint, a clamping sleeve type end through connection head, a clamping sleeve type three way pipe joint and other patterns. I found that even if the same manufacturer of a batch of goods, the cone of these joints on the depth of the hole is often different, resulting in a leak, and this problem is often neglected. The correct approach is to connect the end of the pipe with what kind of joint, and the corresponding connection ends are prefabricated with the same type of joint, so that the leakage problem can be avoided to the maximum extent.
A part of a hydraulic system between a high pressure tubing and a high pressure tubing.Classification: hydraulic hose, high pressure ball valves, quick couplings, odd intention ferrule type pipe joint, welded pipe joints, high-pressure hose, transition pipe joint, sleeve type pipe joint, three way pipe joint, non-standard pipe joint, flaredfitting, rectangular pipe joint, rotary tube connector, quick connector, stainless steel pipe fittings, copper fittings.
