Ice taking operation process of ice maker
The boot must be checked before the automatic water supply device is normal, the level of water storage tank is reasonable (the machine factory has just adjusted level, users can not adjust; plug in the power, the ice machine starts to work, the first pump starts running (air pump for a short time
When the magnetic reed switch is closed again when the machine enters again without stopping the ice making process; compressors are in the ice and ice shedding process; when the ice bucket with ice storage, magnetic reed switch can not be automatically closed when the machine stops working automatically, when removed enough ice, the magnetic reed switch re closed, delay 3 minutes after the machine start, re entered the ice making process.
After about 2 minutes, the compressor starts to start and the machine goes into an ice making state. When the ice thickness reaches the set thickness, the ice plate probe starts, the electromagnetic valve starts to work, the water pump stops working, the hot gas enters the evaporator, about 1.5 minutes or so, the ice falls. When the ice falls, turn the ice down plate and turn on the reed switch.
