and all the galaxies are getting futher and futher away from one another then wouldn't the same happen to earth and the sun. wouldn't we get futher and futher away from the sun????
It is not a factory alarm, it is an after market system, Now you know why it was disabled, i will tell you that is will cause you more head aches than what it is worth, you have no instruction book to it and no information on how to operate it properly. Do your self a favor and remove the system completely and if you want an alarm then by a new one so you have all the paperwork needed to operate it.I would recommend taking it a a place where they install alarms ans have it removed before it starts causing you wiring problems.
It would be helpful to know the names of the ones your shutting down.
For this it goes through the pcm and i believe the gem modules of the explorer. If you are looking at enabling it / disabling it; here's how to do it: Close all doors. Confirm that the ignition switch is in the OFF position. Turn the ignition switch from OFF to RUN. Press the power door lock UNLOCK button three times. Turn the ignition switch from RUN to OFF. Press the power door lock UNLOCK button three times. Turn the ignition switch from OFF to RUN. Verify that the horn chirps. This indicates the enable/disable mode and ready to accept program changes. Press the power door lock UNLOCK button one time then press the power door lock LOCK button. Verify that the horn chirps one time. There should only be one chirp indicating that autolock/relock feature has been disabled. If one chirp is heard, followed by a longer sound of the horn, the autolock/relock feature has just been enabled. . Turn the ignition switch to the OFF position to exit the enable/disable mode. If the autolock status has changed the horn will chirp once. If the status has not changed there will be no chirp.
