Home > categories > Textiles & Leather Products > Carpet/Rug > It's easier to carpet the concrete staircase
Question:

It's easier to carpet the concrete staircase

It's easier to carpet the concrete staircase

Answer:

Will the pull nail in the stair tread corner I play on both sides of the surface between the left 15mm gap between the two pull board, barbed nail into the tendency of Yin angle; blanket pad should cover the stair tread, and wrap the corner kick, cover the width in the time should not be less than 15mm; the carpet per step tread and playing surface width and proper reserved length of material; the top end of the carpet with layering nail on the platform, and then step by step from top to bottom laying. Every step inside of the corner, with the flat shovel carpet will be pressed into a strained gap between the barbed plate play a double game; reserved length, adjustable nail in the next step of the playing surface.
According to the actual amount of the size of cutting carpet; adopts full frictioning adhesive glue binder; top-down trowel to tread on the stairs sit up and take notice and play on the surface, the appropriate hanging carpet is stuck, and then use the flat shovel rolling pressure, make the carpet roll flat, compaction; step by step and step by step, to avoid scraping the laying of large a shave gel slab carpet, no place to stay; if required to install metal anti slip strip, with fixed pressure rod; the prohibition of abortion from the shop after in 24H.
Embedded pressure bar fastener. Each corner of each step is provided with two fasteners, and the central line of the stair width is symmetrically laid. The fastener bore hole wall from the stair tread and play equal to the distance, and slightly smaller than the thickness of the carpet; each step tread, playing surface width and volume cut out carpet length, such as considering the replacement of wear parts, can be reserved for a certain length of perception; from top to bottom by laying carpet. The top end of the carpet with layering nail on the platform, each step of fastener position, cut on the carpet, let the pressure rod fasteners can extend from, and then through the fastener hole metal bar, tighten the screw; be an metal anti slip strip of the stairs, the carpet is fixed, with the expansion of screw (or plastic tube) will be fixed at the edge of the metal anti-skid tread corner nail from 15~ 30cm.

Share to: