Motherboard is Gigabyte A55s2v, the installation is always not buckle on the motherboard deck, check a little distance, but not too hard to press. The The Can explain the book is to support the platform, help!
Is to use the point of strength with the soft can buckle no problem
So that the AMD motherboard is nothing to do bit tight
The main reason is that you can not force the pressure on the motherboard or cpu can not stand, for the first time to install the cpu fan who have such a fear of the second, then you install the buckle when the four screws twisted Too tight, resulting in no yield, it is difficult to pressure down. I now use the mysterious ice 400, more difficult than you can not install, the first fear of the same fear. It was later found that the reason for the difficulty of seizure was to tighten the screws when the amd buckle was locked on the heat sink. Slightly loose about the screws, you can easily seize up, first hold the side and then press the other side can be [the so-called loose, not too loose, but also reported that this can be combined with the cpu surface The picture shows my hungry chassis, mysterious ice 400 and 300 is the same buckle, the beginning is also very difficult to press down to more pressure down, the screw loose after a little easier to solve. ------------------------- practical experience to explain, such as solving your problem please adopt the best
