Marble surface polishing, dark color, no light, how to restore the original
The ground side evenly sprayed K2, K3 drops, while using marble polishing, cleaning machine with red scouring pad, K2, K3 with the same amount of water drops onto the ground, using 175 RPM wiping machine weight 45KG start grinding, the surface effect of heat the material formed in the crystal surface after the crystallization of stone surface.
The marble glue after drying and grinding grinding on the overall use of the ground machine, the whole horizontal grinding, grinding key caulking glue at the stone between (corner stone between) and close to the wall, decorative style, special shape at the edge of the stone floor to keep the overall smooth, polished finish first, re marble glue. Second, continue to complete the caulking and grinding, stone retreading machine with steel mill stone tablets from coarse to fine, (150 mesh, 300 mesh, 500 mesh, 800 mesh, 1000 mesh, 1500 mesh, 2000 mesh, 3000 mesh), is required to complete the eight time to polish the final ground overall smooth, then the steel wire cotton polishing, polishing to achieve the design requirements of the degree of brightness (70 degrees), no obvious gaps between the stones.
Clean the ground thoroughly, clean it with dry and clean ground, and leave no sand or impurities on the ground.The stone surface cleaned, with marble glue to each stone above the small stone to repair the damaged point and raphe, the original stone with the color of marble near the glue to repair the damaged surface. Then use the slot machine dedicated to the original stone stone installation of the raphe re neatly cut slot, slot width, and then close the stone color on the marble glue to fill (Note: if you've already done raphe processing is new open without seam). Such as dry glue can do the next procedure must be repaired after the marble glue.
First, marble maintenance, polishing methods are as follows:1 tools / materials: multi-function brush machine, vacuum suction machine, three speed drying machine, dust mop, scouring pad, pad, marble, plate wire cloth, shovel bucket, water wax stains, all-around cleaning agent, crystal powder, K2, K3 and other hard. ,
