Method for cutting Pillowcase
In size, you have to measure your pillow first. Put a few centimeters on the pillow core. If it is an ordinary rectangular pillow, the length and width of the length and width of the measurement should be increased by about 5cm and the amount of suture of 2cm.
Pillowcases are usually upper and lower ones, and they are stitched together. If you want to install the zipper or button, the next piece is composed of two parts, namely the left and right large pieces of zipper, zipper is intermediate.
Suture:1. suture the lower part first. The right side of the large, wide towards the opposite folding 1cm, then use a line of sewing machine. If you can install zip, right at large, between the left small zippers. Loading can refer to the fitted backrest or other pillowcases.If you want to make a button, fold the wide side of the lower left and right sides toward the reverse, 1cm, and turn inwardOne clue.2., and then first cloth up and down face to face, the opposite side out right. Just stitch it outside, and the edge seam is 1cm.3. over dig buttonhole, set button.The easiest way is to buy one and follow suit. If you don't want to buy it, try the method above.
Size: (grew up wider)Upper piece: width: pillow core is wide, +5cm+2cm suture length is long: pillow core is long, +5cm+2cm suture amountBottom left small piece: width: ibid.; long: 1/3+2cm+2cm length of long pillowLower right large piece: width: the same sheet; long: +1cm long 2/3+3cm+2cm suture amount of the pillow coreYou press this size to cut the upper, lower left and lower right. Cut it out. Can useThe bead pin is fixed on the pillow to see if it is suitable. If not assured. Can use unused clothCut the size first. OK, cut the cloth again.
