Method for treating joint of quartz stone Mesa
Shitai, quartz panel throughout the pad, make joint two sheet gap as small as possible, the smaller the same surface height difference. The control of the gap can be adjusted by cutting or grinding. The height of the board is controlled by the bottom pad, and the smaller the better, the other is not important.
There are two possibilities, the first is the imitation of the quartz stone material, soft, easy processing, like artificial stone, second is the work of the master is definitely has many years of experience, quartz stone to do not see the glue joint part, color plays a part, experienced workers accounted for half of the reason, no experience just to pick me up, HuLong customers say quartz stone seams are so. According to the formal practice, the first line of brand quartz stone seam can achieve artificial stone stitching effect, it depends on whether you find the manufacturer who does not understand
When the glue is thoroughly dried, add water 3000 or more to the finish, light and clean once, the seam glue mark is not obvious, you can omit this step.
Clean the surface of the board and adjust the special glue. The color of the glue is basically the same as the color of the plate. Apply it to the seam.
Hand touch the junction, there is a slight difference can be used to throw the hand polishing machine to solve.
