Method for using fire hydrant water gun and water hose
After connection, there are at least 2 operators hold water, water (non alignment on high pressure to avoid wounding, another operator), slowly open the hydrant valve to the maximum, at the fire extinguishing spray root until the fire is completely extinguished. Fire hose should be opened after drying water, and after inspection confirmed that no damage can be folded into the fire hydrant.
Connect the hose with the hydrant. Insert the fastening button into the chute accurately and tighten in clockwise direction.
1 pull out the fire hydrant door and take out the water hose and water gun. 2 check hose and fittings are good, if damaged, no use. 3, to the direction of fire laying hoses, pay attention to avoid twisting.
