Operation regulation of meat grinder and flour mixer
Rules for the operation of meat grinder (1) clean parts that can be cleaned before use. (refer to instructions for use). (2) assemble and electrify, and then add meat when the machine is working properly. (3) the meat before, please meat eviscerate cut into small pieces (fine strips), so as to avoid damage to the machine. (4) power on, and then add meat after normal operation. (5) add meat pieces must be uniform, not too much, so as not to affect the motor damage, such as found that the machine running is not normal, should immediately cut off the power supply, check the reasons after shutdown. (6) if the leakage, fire and other faults are found, the power shall be cut off immediately, the electrician shall be repaired, and the power shall not be repaired without permission. (7) turn off the power after use. Then clean the parts and drain the water and place it in a dry place. (8) before use, refer to the instruction manual. Not in strict accordance with the operating procedures, problems arise, the consequences of their own.
And noodle machine operation rules (1) clean the flour and flour machine before use, add flour and water, don't overdose, so as not to damage the machine, if need and have more noodles, need to be divided into 2 or more times to stir. Surface water, place, off on board, and then power. (2) and when facing, take two positive and negative directions to stir, so as to make the surface and the uniform. (3) if the mixing is uneven or falling into the dirt, you must turn off the power supply when you need to adjust or take the surface by hand. (4) after mixing, turn off the power supply and take the surface after stopping. Clean up the residue every time. (usually a small amount of noodles can be placed in the tank, and must be thoroughly cleaned on Saturday, Sunday and holidays). (5) not to dilute the flour and flour in order to prevent corrosion and flour machine. (6) if the leakage is found, the power shall be cut off immediately, the electrician shall be repaired, and the power shall not be repaired without permission. (7) before use, refer to the instruction manual. Not in strict accordance with the operating procedures, problems arise, the consequences of their own.
