Paving a square by 3cm thick calculation of how much cement mortar, how to count
The mortar volume of the cement mortar is 1: 0.03 = 0.03 cubic meters per cubic meter of tiles. The cement is available in 325 tons, and the water is about 0.41 tons per cubic meter of mortar. Is 0.41 * 0.03 = 0.0123 tons, which is about 0.246 generation, can be counted as 0.25 generation. By cement, fine aggregate and water, and according to the need to join the lime, active admixture or admixture in the field of mortar , Divided into cement mortar and cement mortar. Generally speaking, 1: 3 cement mortar is 1 part of cement and 3 copies of sand with, in fact, ignore the water composition, generally about 0.6 ratio, which should be 1: 3: 0.6, cement mortar density of 2000Kg / M3.
1 * 1 * 0.03 = 0.03 cubic meters of mortar.
Home residential decoration veneer brick, floor cement with cement mortar and sand ratio should be 1: 2.5 or 1: 3, which, when the floor tiles, the general punishment of the Danmanghao spinning genera in the construction of 1: 3 dry hard mortar The
Cement mortar with 1: 3 mix ratio, I think you can, thick 3CM is also similar to this, per square meter of tiles used to lay the mortar volume is 1 * 0.03 = 0.03 cubic meters. Cement available 325, per cubic meter of mortar water About 0.41 tons, so that each square meter of ground water is 0.41 * 0.03 = 0.0123 tons, which is about 0.246 generation, can be counted as 0.25 generation.If your house is 50 square feet on the ground The amount of cement is about 50 * 0.25 = 12.5. The amount of sand is estimated to be about 0.023 cubic meters per square meter, about 50 * 0.023 = 1.15
