Motor operation column with open and stop button and open and stop the light, it should be selected with a few feet
Is 5 core, if there are other things, then use 5 or more if you have manual and automatic conversion, then it would use 8 or more, preferably 10 or 12 core can be a. Motor (English: Electricmachinery, commonly known as "motor") refers to the electromagnetic induction law according to the law of energy conversion or transmission of an electromagnetic device. In the circuit with the letter M (old standard with D) said. Its main role is to produce the drive torque, as a power source for electrical appliances or various machines. The generator is indicated by the letter G in the circuit. Its main role is the use of electrical energy into mechanical energy.
Cannon head and Lotus head, 35mm head, the same head is also an audio interface head But the XLR head is a more high-end audio interface, is designed for capacitor wheat and other high-end microphone services Balanced Line Balancing Line is the ideal audio signal line for transmission Although it is also an analog audio signal transmission, but the construction and transmission of different principles, the ordinary audio line is a single-core transmission signal, shielding as "ground"; balance line is each two-core transmission signal, the other A separate core for the ground, and the shield to work separately, which can minimize transmission losses, and can effectively eliminate the various external interference, in order to achieve the purpose of high-fidelity transmission of audio signals Summary, Lotus head = ordinary wire, analog audio signal transmission coaxial = digital audio signal transmission XLR = microphone line balance line = more advanced analog audio signal cable According to their own needs to choose wire it The The The The
I am now also encountered this problem before I have applied the electrical wire, cable pipe and trough laying inspection lot, but take the total package that we do not have to do this line is strong, we are weak do not need I am now a little dizzy in the end is to do or not do it
For the motor drag this fast I think I am more persuasive than the above, we dragged for 6 years, I think in the wiring, the specific analysis of specific issues. When the load is not too large, choose to start the buck is right, only consider the rated current when wiring, it is necessary to consider the starting current? Are you guys? If you use the frequency drag it, it is necessary to mention the starting current? Select the cable regardless of the buck or frequency drag, according to the rated current cable can be selected, in accordance with the rated current selection of the main cable is the practice of the test. Do not forget to start the high-current current is instantaneous, only can impact the power grid or motor, will not have much impact on the cable, start time too short friends.
