Home > categories > Minerals & Metallurgy > Graphite Crucible > Procedures for operating high temperature furnaces
Question:

Procedures for operating high temperature furnaces

Procedures for operating high temperature furnaces

Answer:

A, turn on the main power switchB, fill the furnace with argon to atmospheric pressure, open the front door of the furnace and remove the graphite cover plateC, drive the truck switch to OUTD clean the furnace wall, graphite and insulation material
A, check the power line contact is goodB, check if the connection is normalC, check if the cooling water is normalD, check the tightness is normalE, prepare the necessary tools: dust-free paper, anhydrous alcohol, canvas gloves, operating gloves, masks, high temperature gloves, graphite trolley, stainless steel tray
A, the graphite crucible is placed on the platform of the conveying cart, and the position is determined by using the spacing bar.B, pull out the stop lever, switch the car to IN, and then operate the UP - FORWARD - BACK - DOWN, the crucible into the furnace, and determine the delivery vehicle will arrive at the initial position.C, Mount graphite cover plate, tighten the graphite bolt, close the door

Share to: