Buried in the underground PVC threading pipe in the wire was blisters, about two days or so, with air compressor blowing out of the water, so that there is no problem after this circuit? Such as title
Sure there are problems, it is recommended to repair or replace!
Estimated transparent tape you certainly do not want to use, I recommend you can buy a special stained tiles of plastic, or glass glue, put it on the tile first, until the fast dry when the wire stick to it!
Hello, a complete set of monitoring system mainly include: First, the front-end equipment: camera (network type, hemisphere type, pinhole type, standard gun type, integrated type, industrial type, etc.) Second, the transmission equipment: Equipment: dvr or capture card, etc. Fourth, the display device: monitor or splicing screen
The maximum load current is 200A. Voltage loss requirements of not more than 26.6V. 95 square above the cable can pass this current. Voltage loss of 95 square copper cable = 500/95 / 58X200X2 = 36V, with 150 square copper wire cable voltage loss = 500/150 / 58X200X2 = 22.9V. If you do not consider the economy with more than 150 square feet of copper or more than 185 square aluminum core cable. If you want to consider the economy can also be used 120 square copper core or 150 square aluminum core cable. Because the total power of 100KW load in the actual use of the maximum current is about 120A
