Online seeking, in the end ok online
8 mm thick and 12 thick. To warm the best with 8MM, the same thing, the best shop 12MM feet feel good!
If it is geothermal, it is best to be more than 10mm, because it can not be considered on the heat fast, you have to consider the stability of geothermal choice of multi-layer solid wood flooring, stable and heat storage, you can go to the Filinger home to see them 90 Anniversary activities, my brother just two days ago in his family set
I am the floor of the manufacturers to strengthen. Strengthen the thickness of the floor is generally 7mm, 8mm, 10mm, 12mm, 15mm.6mm little, but also have. Generally speaking (non-absolute), the same wear-resistant situation, the higher the thickness, the higher the price. General domestic positioning is also 8mm or below the positioning for the low-end. Wear-resistant also do relatively poor. So, if you want to choose to strengthen the floor, not only to see the thickness, it is very important to blossom, but from the production point of view, a lot of floor positioning is to wear As an important indicator. Wear high, the substrate is generally not used too bad. The current national standard, the home of more than 4000 rpm on it. That is equal to AC2, or 38g wearable paper. It is worth mentioning that the more uneven the surface layer, the lower the number of revolutions. For example, the same is 38g, the plane of the mirror, wear better than the grip pattern. Wear and grade are: AC1, AC2, AC3, AC4, AC5. Corresponding wear and tear weight were: 33,38,45,56,64. Of course, some manufacturers have subverted these equivalents, the lowest Some use 18g, 23g, or even no wearable paper. Directly on the adhesive paper itself after curing glue wear. Above is incomplete information for reference.
National standards: 8 mm thick and 12 thick, and now are generally 12 thick.
