I have an inductor that I have unwinded. I measured it with a micrometer and it seems to come out at about 0.58mm wire. The wire was covered with a lacquer to help hold it all together. There was about 825cm of this wire.Would it make much of a difference to the inductance to rewind this inductor using 0.50mm wire instead of 0.58mm?
If you rewind it exactly the same as the old one,not much change on inductance. But the copper loss increasing a bit.
If you use the same number of turns and length of winding the inductance will be the same. The resistance will be higher.
