Shower room of the thickness of the retaining bar to be appropriate ah?
Shower room retaining bar is generally 40MM to 50MM high, thick is almost 30MM to 40MM. Are generally finished stone processing. Not expensive, generally in the 150 / mil. A shower room to block the water on the 1 meter wide. It is almost 200 dollars. You can go to Kai Li asked, their home shower room water effect done quite fine.
In general, the practice of installing dry and wet partitions in the bathroom with glass partition, you can slide, in the glass below the installation of 2 cm thick stone on the line; there are hanging curtains wet and dry partition, this situation can be done 3-5 Cm, as well as in the bathroom to install the shower room, this will not have to install stone.
The fundamental purpose of the installation of stone is to prevent the flow of water to the door side of the back. General mud workers in the bathroom level is done when the slope, there should be water to the direction of leakage to stay. The ground and then install the stone retaining strip can effectively prevent the water when the splash of scattered water, this situation, the installation thickness of about 2 cm on the right.
