Bathroom shower room installation, has been waterproof, and not shop tiles, is not this time buried stone base?
Most of the master will recommend you lay the tiles and then put the stone base, because the tiles to cut match stone base, and the stone inside and outside the tilt to be based on their own ground drain to do, very troublesome. But the master is responsible for the spectrum will certainly let you shop in the tiles at the same time embedded, shower room business will certainly suggest you do so, the effect is better than with the glass glue stained tiles above
Stone processing: for the corner of the cylinder and can not be installed in the basin can be used as a stone-based water treatment, stone foundation can be embedded, embedded in the wall and the ground 1-2 cm, can also be paved the ground and then loaded stone Base, and then the shower room can be installed in the above, but please note that when the custom shower room to reduce the embedded part of the wall, stone-based artificial stone and real stone points. Direct use of the ground brick shower pockets: according to the size of the pockets provided, the pond surface is less than 2 cm on the ground floor, floor drain with stainless steel pieces, the overall effect is better and can avoid the wall, the cost is low.
Paved it, when installed with glass glue on it
Shower room to be installed after the tile paste! The Generally in the tile above, there is a certain height, you can effectively retaining the water. But also a little low, and the tiles of the mud to speak well, when the tiles installed together, but the tiles are not good shut.
