Shower room glass glue mold point how to remove?
Shower room glass gelatin point is brown algae, is a very strong vitality of the bacteria, the way of breeding the mold is divergent spores, then we can use bleach to clean these mildew.
Use bleach Note: Use bleach should be handled with care because bleach is irritating to mucous membranes, skin and respiratory tracts, heat and light will decompose and easily react chemically with other substances. Improper use of bleach will affect its bactericidal function, and even cause accidents, threatening health. Excessive use of bleach or the use of excessive concentrations of bleach, will produce toxic substances pollute the environment, destroying the ecology.
Clean the glass paste with bleach
1, to bleach the concentration of sodium hypochlorite to 5.25% to calculate the adjustment method is as follows, 1: 99 dilution of household bleach (10 ml of bleach mixed with 1 liter of water), can be used for general household cleaning. 1:49 Dilute household bleach (mixed with 10 ml of bleach in 0.5 liter of clear water) for disinfecting surfaces or objects with vomit, excreta, secretions or blood.
2, if the use of bleach in the concentration of sodium hypochlorite higher or lower than 5.25%, the components used will be adjusted accordingly. Calculation method: bleach water content multiple = 5.25 ÷ bleach water sodium hypochlorite concentration. Use the spoon and the measuring cup to accurately measure the amount of bleach required.
3, disinfection of finished items, should be washed with water and dry. After disinfection, the cleaning equipment immersed in dilution bleach for 30 minutes, rinse with water before they can be used again. Finally wash your hands with a clean towel or wipe your hands with a disposable paper towel.
You can use a hot cloth to wash away the detergent, and then use alcohol disinfection.
To remove many of the methods, you can try the following:
1, with soap plus a little ammonia and turpentine mixture, you can remove many dirt
2, with a good sticky transparent glue repeatedly tear, you can remove some of the surface
3, with a little bit of sodium water to wipe off, or paint thinner can also be.
4, you can use hair dryer dry, and then gently scraping on it
5, wipe with a cotton swab dipped in water.
6, wind oil fine wipe.
7, use a special cleaning agent or sports shoes to remove the cream wipe.
8, with the drawing with the 4b rubber is very soft that kind of Korean rubber can erase it.
9, if it is a long trace of traces have been hardened, you can use a hot towel to get it soft and then rub.
