Solar water heater all intelligent controller how to install
This is the most widely used solar water heater installation program, the solar energy operation by the solar controller 8 control, when the solar water heater tank water level below the minimum water level, the controller to open the solenoid valve 1, making the water tank, When the water level rises to the user set the highest water level, the controller closes the solenoid valve 1, the water stops. The user can specify the water time, when the specified time to, as long as the water level does not exceed the maximum water level, the controller will open the solenoid valve 1 water until the water level to the highest water level. The controller can also manually force the water: When the manual water key is pressed, the controller opens the solenoid valve until the water level reaches the highest water level.
Different manufacturers are not the same, you can call to contact after-sales processing
Different solar water heater brand, the controller used is not the same. But the total is divided into the next type and side of the two, if you understand the installation of solar energy can first look at the probe to stay and then install the mouth. If you do not know you only looking for solar manufacturers aftermarket.
The controller can also control the electric heating. When the electric heating key is pressed, the controller turns on the power of the electric heater 7 and the electric heater operates until the user specifies the temperature. When the temperature drops below the specified temperature 3-5 degrees, the controller restarts the electric heating and heats the water to the specified temperature. Users can also specify the heating time, at a time, the temperature of the solar water tank can not reach the set temperature, the controller will turn on the electric heater, the water tank to the water set to the temperature so far. The controller also has a protective effect, and when the water level drops to a certain point, the electric heating stops until the water level rises above that point. (Usually 50% of the water level).
