Solid wood composite floor suitable for installation to warm it?

Answer:

Home decor. The I've been doing it for twenty years. Composite flooring. My advice. Or the line.

Pavement must pay attention to check your home to warm the pipeline and all buried in the floor under the water pipe installation is scientific, followed by the choice of the appropriate solid wood flooring. To warm wood floor selection criteria 1, the floor size is stable, can withstand the temperature change is not damaged. 2, no deformation, cracking, thermal expansion and contraction coefficient is small. 3, environmental protection, no formaldehyde and harmful gas release. 4, not afraid of water soaked floor (to prevent damage to the floor of the geothermal pipe damage). Solid wood flooring and composite floor comparison 1, in general, the composite floor is more suitable for use to warm the floor. Because the standard thickness of the floor is 6.5 ~ 8.5mm, the thickness of the composite floor is mostly 6 ~ 9mm, of which the laminate flooring is mostly 6 ~ 8mm, the three-layer parquet is 8 ~ 9mm, the heat transfer performance is better, and its The surface layer of aluminum oxide wear layer, the wear layer is conducive to the rapid spread of heat on the surface. 2, solid wood flooring in the general thickness of about 2cm, the installation should also play keel, used to warm the floor, then the floor and the ground between the air, air and wood thermal conductivity are very low, so heat is not easy to conduct to the surface, will lead to The waste of heat, the surface temperature is not uniform, the temperature difference is obvious, and the composite floor after high temperature suppression, the internal moisture content is very small, so the floor will not be due to the loss of moisture and deformation. Multi-layer solid wood flooring between the layers of each staggered, each containment, the back there are dense anti-deformation trench, decomposition of the heated surface stress, so the deformation is very small.