i soooooooooooooooooooooooooo bored theres nothing 2 do im 11 and i hate hannah montana,barbies,.okay im a girl but wat can i do plzzzzz help me
you will need to provide a proper surface for paintingdepending on the surface condition you mode will be different if clean steel or aluminum just use an SP1 solvent wipedown with either xylene or methel ethyl ketone to remove surface contaminants if lightly rusty or oxydized then use either an SP2 hand tool cleaning (wire brush / scraper) or SP3 power tool cleaning (power brush / power chipper) If highly rusted or oxidized, then use an SP6 commercial blast cleaningalso you will need to use a paint compatible with your parent material.
Make sure your material is clean, wipe down with alcohol or paint thinner and allow to dry before painting, another hint is to heat the material right before painting (this opens the pores of the matal to give the paint something more to biteone other thing make sure the paint is still good, and there is no moisture from the compressed air to the paint gun.
Preparation of metal surface is key to getting any paint to stick and lastI'd use a waterbased cleaner that will rinse clean and leave no surface residueThen proceed with etching the metal surface so the paint can bite into something and not peelI've used the KBS products with much success.
