I have surround speakers i want to splice av connectors to my speakers so i can plug my speakers in to my tv
Radio Shack in all probability has what you pick, or you may make it up out of previous cables. (they're referred to as RCA plugs or cables) RS used to have (and prob. nevertheless does) the cable ends you ought to plug into the HT device. Solder a chew of speaker cord to the cable end, and strip the different ends, and voila. Or cut back one end off a cable and strip the wires. word: you will in all probability discover them layered for this reason: outer insulation, small cord filaments, inner insulation, small cord filaments. using this technique, strip returned the outer insulation a pair inches; pull the 1st layer of cord filaments removed from the internal insulation, and twist them jointly like final the twist-tie on a bag of bread; strip the internal insulation some million/2 so some distance as you probably did the outer; twist the internal group of wires jointly. for the duration of setting up, do not permit the two gadgets of cord touch one yet another; it won't reason injury, yet you will not hear something the two.
That would be the same as putting RCA plugs on your wires.
Wont work. Try hooking a 9 volt battery to your power saw. Not enough power. The RCA jacks on the back of all your equipment provide what is called line-level signals. Information, but no power. Your speakers are MOTORS. It requires watts of power to make them move. You put something called an AMP between the line-level signals and the speakers which adds power to the sound. Hit your local Craigslist for a 5.1 AV receiver for $100 or so. Try to stick with name brands like Yamaha, Onkyo, Dennon, etc. Hook your TV to the inputs on the receiver, then the speakers to the speaker terminals and you will have sound.
Radio Shack possibly has what you want, or you may make it up out of previous cables. (they're stated as RCA plugs or cables) RS used to have (and prob. nevertheless does) the cable ends you ought to plug into the HT device. Solder in simple terms a splash speaker cord to the cable end, and strip the different ends, and voila. Or decrease one end off a cable and strip the wires. be conscious: you will possibly locate them layered as a effect: outer insulation, small cord filaments, inner insulation, small cord filaments. making use of this methodology, strip lower back the outer insulation a pair inches; pull the 1st layer of cord filaments removed from the indoors insulation, and twist them at the same time like ultimate the twist-tie on a bag of bread; strip the indoors insulation approximately 0.5 so a techniques as you probably did the outer; twist the indoors team of wires at the same time. in the time of installation, do no longer enable the two gadgets of cord touch one yet another; it won't reason harm, yet you will no longer pay attention something the two.
