The difference between cemented carbide YG 15 and yg12
K30 YG8N YG8 14.5-14.9 160089.5 is suitable for cast iron, nonferrous metals and their alloys and non-metallic materials processing, not smooth, rough and discontinuous cutting section of rough planing, rough milling, drilling, reaming hole and deep hole. K30 YG8 YG10X 14.3-14.7 220089.5 is suitable for the production of small diameter micro drill, milling cutter, rotary file etc.. K35 YG10X YS2T 14.4-14.6 220091.5 is an ultrafine particle alloy, suitable for low speed rough turning, milling of heat-resistant alloy and titanium alloy, as cutting knives and taps, saw blades, milling cutters are preferred. K30 YS2T YL10.1 14.91900 91.5 has better wear resistance and bending strength, mainly used for the production of extruded bars, suitable for general drills, cutting tools and other wear-resistant parts. K15-K25 YL10.1 14.52200 YL10.2 91.5 has good abrasion resistance and bending strength, mainly used in the production of extruded rods, made of small diameter micro drill tool, watch the whole processing, and other cutting tools and wear parts reamer. K25-K35, YL10.2, YG15, 13.9-14.2 210087 are suitable for high tensile steel bars and steel tubes under high compression, for upsetting, piercing and stamping tools under larger stresses. YG15 YG20 13.4-13.7 250085 is suitable for production of stamping die, stamping parts, such as watch spring plates of musical instruments; die punching battery shell, toothpaste tubes; stamping die small size steel balls, screws, nuts etc; twist drill bits.
Material introduction: YG3X 14.6-15.2 132092 is suitable for high speed finish machining of cast iron, non-ferrous metal and alloy, hardened steel, alloy steel and small cutting section. K01 YG3X YG6A 14.6-15.0 137091.5 is suitable for semi hard finishing of hard cast iron, non-ferrous metals and their alloys. It is also suitable for semi finishing and finishing of high manganese steel, quenched steel and alloy steel. K05 YG6A YG6X 14.6-15.0 142091 has been proved by the production and use that the alloy can be used to process chilled alloy cast iron and heat-resisting alloy steel. It can also achieve good results and is also suitable for the finishing of ordinary cast iron. K10 YG6X YK15 14.2-14.6 210091 is suitable for processing integral alloy drilling, milling, reaming and other cutting tools. It has high wear resistance and toughness. K15 K20 YK15 YG6 14.5-14.9 138089 is suitable for semi finishing with medium casting speed of cast iron, non-ferrous metals and alloys, non-metallic materials. K20 YG6 YG6X-1 14.6-15.0 150090 is suitable for cast iron, nonferrous metals and alloy non metal material during continuous cutting finishing, discontinuous cutting the semi refined car, fine car, small section fine car, coarse thread, continuous section semi finishing milling and finish milling, rough and fine hole expansion. K20 YG6X-1 YG8N 14.5-14.8 200090 is suitable for high speed cutting of cast iron, white cast iron, nodular cast iron, and chrome, nickel and stainless steel.
