In the edius in the material video to the timeline do not want the video inside the voice how to do
After the thick green is because your ground line and other lines or pins coincide, you have to re-wiring
Why is the TV sound received on the amplifier to enlarge no signal? A: The TV itself belongs to the audio input device, and now the digital TV receives the audio signal directly after the internal integrated speaker amplifier. Therefore, many televisions do not have an external audio interface. In the face of this situation, there is a way to cable TV box and the TV connected to the red, white, yellow line of red and white line unplug the speaker, yellow line pull TV (because red and white is about audio cable, Yellow is the video line), the principle of doing so is the input source and the TV inside the speaker system disconnect and another external speakers. If you are using a network TV box, then it is simple, directly to the speakers connected to the TV box. Do not rule out individual attention to the details of the practice, such as millet TV can be an external speaker. External speakers and TV connection also depends on the actual situation, Bluetooth connection or audio cable connection, but no matter what method as long as the connection is no problem. If the TV supports an external speaker but does not sound on the speakers, check that the audio settings on the TV are correct or check that the connection is correct. If the TV itself does not support external speakers, please connect the speakers to an external audio source device, such as TV box, Fan Chicken Day course. The following is the perfect information, just read your picture to add: After you see the picture, see your TV on the audio output is SPDIFOUT interface, this is the digital audio and general headphone interface is different (headphone interface is analog Audio), the problem should be here, you have to find a support for SPDIF audio input speaker connected to the job.
VV is a copper core PVC insulated PVC sheathed cable, usually laid in the room, tunnel and pipeline, long-term allowable working temperature shall not exceed 65 degrees Celsius, cable laying ambient temperature should not be less than 0 degrees Celsius, the use of cable environment The temperature is not less than -40 degrees Celsius
