The sitting room how to shoot the light off?
Only take samples of the glass in the middle of the chimney, dial came down hard.
The removal of circular suck chandelier on the head: If bedroom absorb dome light is round, when removing the time to pay attention to. Step 1: turn off the ceiling lamp power, only turn off the power supply, to ensure the process of removal is safe. The second step: use a screwdriver slowly down the chimney of the iron ring around 3 small screw, then rotate until unscrewed the lampshade. Step 3: remove the light bulb.
The removal of embedded absorb dome light: This kind of dome light of disassembly tend to scare a lot of people, all think it is very complex, not break down, in fact, think about it, since it can't come off on this, it must be something stuck it oh, so careful you as long as careful observation can be found to have a spring clip it gets stuck, just to break it down, remember, before I can take off power.
The removal of aluminous gusset plate to absorb dome light: Aluminous gusset plate down the dome light is relatively simple ' The first step: to cut off the power supply. Step 2: use a small screwdriver or small thin blade from aluminous gusset plate of hemming cock one horn, remove the lamp shade; The third step. Pull aluminous gusset plate in the same way under a small piece, and remove the light bulb.
The removal of rectangle suck chandelier on the head: Rectangular dome light relative to the circular dome light is trouble to remove some. Of course the basic steps or similar. The first step: to cut off the power supply. The second step: take chimney, rectangle should absorb dome light shade from the four corners of his, with suction glass dish wash dish, suction in the edge of the aluminum alloy section, slowly down every Angle (note: oh), until remove the lamp shade. Step 3: remove the light bulb.
