This time control switch how to set the control time
After the timer is set, press the "timer" button to check whether the timing setting is consistent with the actual situation, if not consistent, please press the school, school, school week to adjust or reset;
After checking, press the "clock" button, so that the display shows the current time;
Press the "Auto / Manual" button to set the "▲" symbol below the display to the "Auto" position. At this time, the time and space can be turned on and off automatically according to the set time. If you want to use the process of opening and closing the circuit, you only need to press the "automatic / manual" button to "▲" symbol to the corresponding "open" or "off" position.
Time setting of the time control switch:
First check the clock display whether the current time is consistent, if you want to recalibrate, hold down the "clock" key at the same time, hold down the "school week", "school", "school" key, the clock transferred to the current accurate time ;
Press the "time" button, the bottom left of the display "1 open" words (that the first time to open). And then press the "school week" to select the six-day work system, five-day work system, three days of work, the same daily, different daily work mode, and then "school", "school" key, time;
Press the "time" button, the bottom left of the display appears "1 off" words (that the first off time), then press the "school week", "school", "school" key, enter the required closure Date (note: off date must correspond to open date) and time;
Press "timed" button, the lower left of the display will display "2 open, 2 off, 3 open, 3 off, ........, 10 open, 10 off", refer to steps 2,3 After each switch time;
If you do not need to set 10 groups of switches every day, you must press the "Cancel / Resume" button to erase the time of the remaining groups to display the "- -: - -" pattern on the display (not 00:00)
