Toilet urine sensor inlet from the ground how high?
About 1.2m from the ground like
First, according to the height of the installation of ceramic urinals to determine the height of the urine sensory device to avoid the installation is too high or too low, (too small urinal small pipe length is not enough, and affect the use of part of the crowd); ceramic urinal distance from the ground About 950mm or so, and then according to the situation of ceramic and internal pipe to determine the appropriate urine sensor size; installed urine sensor before the pipeline should pay attention to the first sediment and impurities with a certain water rinse to prevent impurities into the solenoid valve, embedded Box box depth According to the size of the box and the completion of the wall, the tile surface should be flush with the construction protective cover, less than 8cm thickness of the wall, please choose the box height of 6cm or direct use of the installation of urine sensors.
2: Urine induction Drain pipe outlet hole should be with the ceramic urinal water hole protection in the same center line, to avoid deviation from the center line position, affecting the appearance of all the installation steps in accordance with the installation of the company after the installation diagram, open the pipeline water valve, Observe the urine sensor inlet joints are seepage phenomenon, if the urine sensor at this time in the water outlet is also off the normal water is also due to some manufacturers with 6V pulse solenoid valve, although the factory test when the solenoid valve is closed, but Due to transport or handling process of vibration, so that the solenoid valve core is sucked by the magnet, you need to turn on the sensor panel can be reset.
1.1 meters ----- 1.2 meters can be, this height is in the tiles after the size of the shop, tiles generally used 5 cm. Mao Mao Mao, then, in the 1.2 meters plus 5 cm.
