The bearing type is 6208, and the outer ring of the bearing is fixed to the bearing seat (HT200), but there is no rotation, and the inner ring rotates with the shaft. It's not ideal to look up some information. Forget master advice!Want to find bearings and shafts, bearing seat tolerances and coordination, the shaft diameter of 40, the bearing seat of the inner diameter of 80, bearing inner ring with the shaft rotation, the outer ring relative to the bearing seat at rest
Let the bearing outer ring than the bearing seat diameter a little bit, forming interference fit
Shaft tolerance and synthesis fitBearing 6208Tolerance grade of bearingNormal,Instructions: please check whether the selected bearings contain the specified tolerance level. Please also refer to the relevant description of each of the bearingsMatching [mu m]Positive = interferenceNegative = clearanceMax minIn theory 6-5Probably 6-5Medium 0.5Shaft bore of bearing seatTolerance [m] tolerance] [m]Maximum 6MaximumMinimum -5MinimumJ5 level fits for common loads or motors, turbines, woodworking machines, etc.Wuhan Shengye Transmission Development Co. Ltd.Application Engineer
For the construction of machinery such as winches, the general axis and bearing inner ring labeled as the base hole system, H7/k6, outer ring and bearing holes I do not know
